Perhaps many people think that chillers will feel strange, but air-conditioning fans and water-conditioning believe that many people will be more familiar with them. In fact, these three belong to the same product. The air cooler was introduced to China more than 10 years ago. It is mostly used for refrigeration in supermarkets and factories. In recent years, domestic air coolers have also been used more and more. At present, the market competition of chillers is becoming more and more fierce. Some manufacturers do not distribute dust-proof nets to customers in order to control the cost and obtain more profits. So the air filter is essential for the air cooler, or is it optional?

The air cooler can achieve air convection while cooling, bringing fresh outdoor air into the room. There will be a lot of dust in the air. When the air is exchanged, the dust will inevitably be brought in. The larger dust particles can stay outside the curtain, but the small dust will follow the airflow into the room. The quality of the indoor air slowly becomes very poor. However, if there is a dust-proof net, the outdoor air can remove a part of the large dust impurities through the filter of the air filter, and the small dust can be filtered out when passing the wet wet curtain, so that the air enters. There is little dust in the room, and the quality of the air can be guaranteed. Yuyao air cooler, Cixi air cooler

The air filter can also extend the life of the wet curtain, especially in the textile mills and garment factories. This is a dust-proof net that can block the wool, fibers, etc. in the factory from outside, and avoid blocking the air inlet of the wet curtain. If there is no protection from the air filter, the blocked curtain will not only affect the air intake but also cause the motor to burn out.

Industrial air conditioners are also called industrial air conditioners. The changes in the four seasons have also brought about great changes to the creatures of the four seasons. Natural phenomena will also bring hints to the development of industry. Generally, the water temperature like a subterranean well belongs to the constant temperature of the four seasons. Depending on the depth, the distance from the ground will be more stable. But if it is too deep, it will not be too cold in summer. The principle is that the cool air under the shallow layer will sink and the hot air will evaporate upward. Therefore, some refrigeration principles of the air cooler are also developed based on this natural phenomenon. Yuyao air cooler, Cixi air cooler

  

In the transmission of well water, the noise of traditional pumping water pumping is very large, affecting people's normal life. Through continuous research by professionals, industrial air-conditioners ensure environmental protection and reduce noise generation while cooling. The problem caused by a small well, energy saving is also a big problem. The power consumption of industrial cooling fans is only one-third of the current air conditioning, and the energy-saving effect is increased by two-thirds. Such a prominent advantage has saved a large part of the operation of the industrial production area.

The cooling speed is fast, the environment is environmentally friendly, and the refrigerant is not contained. If the Freon is not added, it will not pollute the environment and cause harm to the human body. The use of industrial air-conditioners, air ducts for the air circulation system is to mobilize indoor and outdoor air. Thereby the indoor temperature is lowered to achieve the desired cooling effect. Therefore, the industrial air conditioner that utilizes the laws of nature is very comfortable for the hot weather.

In the departments of metallurgy, machinery, construction, etc., chillers have been widely used. The air cooler generates strong noise during operation. The noise of the air cooler is transmitted to the surrounding space through the entrance and exit, the casing, the pipeline, etc., which not only damages the physical and mental health of the staff, but also seriously pollutes the environment. Now the air cooler noise has become an important source of noise pollution. In order to improve labor protection and environmental protection, effectively control the extent and extent of the impact of chiller noise on the environment, and develop low-noise chillers to meet the corresponding allowable standards, the noise of the chillers must be treated. Yuyao air cooler, Cixi air cooler

Cooling fan noise source:

When the cooling fan is operated under certain working conditions, the noise generated mainly includes aerodynamic noise and mechanical noise. The aerodynamic noise has the strongest intensity and is the main part of the cooling fan noise.

Overview of air blower noise control measures:

1. The noise of the casing and the motor can be solved by installing an acoustic enclosure. The cooling fan is placed in the independent sound insulation room of the air cooler, and the sound absorption and sound insulation are processed in the air cooler.

2. Install a muffler outside the air vent of the air cooler, and built-in muffler inserts to reduce noise when passing through a specially constructed muffler. The muffler is an effective measure to reduce the radiation of the inlet and exhaust ports of the aerodynamic device or to transmit noise along the pipe.

3, the outer layer of the blinds on the ground floor use as much as possible.

4. The cooling fan is suspended by a damper spring hanger damper.

According to the sound source object, noise characteristics, noise reduction requirements, process conditions and installation location, the design is targeted to ensure good noise reduction and noise reduction.

(1) The installation of the air outlet should achieve uniform air supply throughout the space.

(2) To achieve the minimum wind resistance and noise of the designed duct.

(3) Directional air supply for work should be installed according to actual requirements.

(4) The radius of the bend of the pipe is generally not less than twice the diameter of the pipe.

(5) Pipe branches should be minimized, and branches should be effectively allocated for air volume.

(6) The design of the duct should be as short as possible. It is best to use a straight line to avoid excessive bending.