Air-conditioners are now used in many places, and the cooling effect of air-conditioners is very strong. There is an evaporative air conditioner in the air conditioner family, which is more commonly used. Many people don't understand why evaporative air conditioners are so popular. Tell us about his advantages and you will know.

    1, can be used for overall cooling and post cooling; cooling effect air outlet temperature is about 5-15 degrees lower than the outdoor.
    2, the operating cost is low, about 80% than the traditional central air conditioning, 150m2 cooling power consumption of 1 degree per hour.
    3. Low maintenance costs, no need for professional staff.
    4. Environmental protection: no compressor, no fluorine, good for environmental protection, zero pollution, no exhaust emissions.
    5, product features: with cooling, ventilation, dust removal, odor removal in one.
    6, the new wind operation, increase the oxygen content of the air.
    7, stable performance, reliable quality: with automatic intelligent control and 8-72 hours automatic cleaning.
    8. Investment province: Save more than 50% of investment in traditional central air-conditioning, and invest 80-150 yuan per square meter.

The cooling effect of the air cooler is related to the air volume. The faster the ventilation efficiency, the more air air is blown into the room. However, it is impossible to achieve a comfortable environment by simply changing the air. If you only increase the amount of ventilation, it is equal to the exhaust fan.
So how to make the cooling fan achieve better cooling effect, or to complete the motor fan blade, water pump, wet curtain, and so on.
The pump flow is relatively large, the density of the wet curtain is denser, and the fan motor is larger. Only the cooling effect of these three is enough to be better. Of course, increasing the power and materials of the three components will also increase the cost of the chiller.

The air cooler sends filtered cold air to the room. The indoor air density is increased, forcing the window to form a positive pressure zone, and the indoor sultry air is driven out of the room due to the increasing air pressure. In the actual application of industrial plants, the chillers are installed centrally on one side of the plant, and are exported to the other side of the plant. The air is convectively blown from the outlet to the outlet of the chiller. During this process, the doors and windows near the chiller remain closed, forcing air to be compensated into the workshop by the door and window on the side of the inlet. The air is lined up in an orderly manner, flowing into the workshop from the air inlet, flowing through the workshop, and discharging the workshop under the pressure of the large air volume of the air cooler. The ventilation is thorough and efficient, and the ventilation rate can be as high as 99%. Through specific engineering design, designing ventilation speed and wind speed according to needs, any high heat, harmful gas and dust smoke can be quickly discharged into the workshop, and any problem of poor ventilation can be completely solved at one time. Ventilation is achieved within seconds of turning on the chiller.