Negative pressure fan can solve the hot problem of workshop, smoke does not disperse, dust concentration, odor, poor natural ventilation and many other problems; Do you have this problem in your workshop? If so, then you have to have a negative pressure fan to solve the situation.

Negative pressure fan is handy in solving the hot problem of large industrial workshops; If you do not know negative pressure fan, then you should reflect on yourself. This is a commodity that has been circulating in the market for more than ten years. Through more than ten years of evolution, it can be done now, with higher exhaust air volume, lower energy consumption and better anti-corrosion effect.

The difference between air cooler and air conditioner:

1, air cooler only cooling and poor effect (in general, air cooler is suitable for large plant, can make the workshop temperature down to 20 degrees, let the human body feel comfortable, of course, hot days outside the workshop temperature is too high will seriously affect the specific temperature of the air cooler), air conditioning can significantly adjust the temperature of indoor air.

2, the air conditioner can adjust different types of temperature according to the need, and the air cooler can not adjust the temperature according to the demand, only cooling.

3, air conditioning can remove the humidity of the air, air cooler can not (air cooler is all water vapor, can increase the ambient humidity in the room).

4, air conditioning structure is complex, the price is relatively expensive, indoor air temperature is not uniform, easy to cause discomfort, ventilation, easy to suffer from air conditioning disease. Air cooler small size, low price, green environmental protection.

5, air conditioning can be used directly, and the use of air cooler must add water and ice, inconvenient application.

6. The centrifugal fan has a single function, and the air conditioner can also make heating and dehumidification, but the energy consumption of the air cooler is low.

Air cooler can cool ventilation, dust removal and smell removal, is a kind of multi-functional natural ventilation cooling machine equipment, and is relatively environmental protection and energy saving, the investment cost is very low, and the application of air cooler is very wide, basically can cover all fields of application. In that case, do you understand the cooling principle of the air cooler?

Air cooler, also known as mobile environmental air conditioning, can be customized for natural ventilation and cooling according to the principle of water evaporation, digestion and absorption. The total area of evaporation seriously affects the total area of cooling. Air cooler is a green environmental protection product without refrigeration compressor, refrigerant and air conditioning copper pipe. Its 1.1kw point is 1/8 of general central air conditioning, which can save a lot of power engineering consumption. When it works, it can absorb the outdoor gas and pass through the cooling water curtain, digest and absorb the heat and temperature, and transport it into the room and indoor environment to carry out heat convection, so as to achieve the cooling effect.

The application of air cooler is relatively environmental protection and energy saving, its use of electricity is not very high, the application cost is very low, and because of its cooling characteristics, will not cause organic waste gas, will not cause pollution substances, can achieve 4-10℃ cooling effect, set ventilation, gas removal as one, can also increase the air oxygen content, covering a range of 100-300 flat hair meters.

The high temperature is hot, the air is not circulated, and the uncomfortable environment of dust in the workshop will lead to the increase of staff turnover rate. The reduction of production force and quality control will probably lead to customers not choosing you. How to reduce the temperature of the relevant plant is recommended below? And what are the common plant cooling?

How to reduce the temperature of the plant?

1. Improve ventilation and cooling:

The specific method is to open the original ventilation Windows in the workshop, so that the outside of the workshop is introduced according to the Windows, and the high temperature in the workshop is brought in the step of air activity, so as to reduce the high temperature fusion in the workshop. This method is small for the category. More Windows. Better ventilation standards of the workshop effect is obvious. For an area of more than 300 square meters. Ventilation standard deviation workshop, poor function, characteristics are worth.

2. Machine and equipment negative pressure fan super strong exhaust high temperature air:

Specific methods to close to the source of high temperature wall or roof machine equipment negative pressure fan. When the negative pressure fan is energized, the negative pressure caused by the high air volume of the negative pressure fan is used to exhaust the air, and the high temperature air in the workshop is quickly discharged out of the workshop along the air flow, and the fresh clean air from the outside is introduced into the workshop together. This method is available at scale. Building with standard deviation of ventilation. Its benefits can solve the plant temperature reduction faster.. Conducive to implementation.

More common plant temperature reduction machinery and equipment have the following two kinds:

1. Negative pressure fan, exhaust system high temperature hot air cooling. The negative pressure fan of the wall and window machine equipment in the workshop forces many combined high temperature hot air in the workshop to be discharged out of the workshop, forming a negative pressure development trend of the workshop, forcing the air outside the workshop to flow into the workshop for convection heat transfer and ventilation, reducing the composition of high temperature hot air in the workshop, and developing the circulation speed of air commodity in the workshop. This method can be used to block the flow of air goods. All plants have high temperature incandescence treatment plant.

2. Mobile air conditioning, cooling the air outside the building and then sent to the building for cooling. Machine equipment mobile air conditioning on the wall of the workshop, according to the fan exhaust system to the workshop. After the outdoor fresh air passes through the infusing cooling water curtain, the air and water are in sufficient contact to digest the heat and temperature of the important links of the air, so as to achieve cooling. Ventilation. Dust removal. Plus workshop air oxygen content intention. This scheme is especially used in areas where high temperatures are available.