Air cooler cloth air duct, air conditioner air duct is also called high temperature smoke exhaust pipe, high temperature smoke exhaust pipe, which is only the name of industry application. The air cooler cloth air duct, air conditioning air duct structure is surface steel ring structure, wear resistance and negative pressure resistance; Fire safety Kevlar raw materials; Because the surface is maintained by a tough steel ring, it can be dragged freely on the floor without damaging the ventilation ducts.

Air cooler cloth duct, air conditioner air supply duct key attributes:

1, powder unmetallurgy unique continuous high temperature coating

2, better temperature resistance

3, high elasticity and air compression ratio of 4:1

4 outside according to the spiral wire stainless steel plate (VA) has damage buffer

5, the outside stainless steel wire firmly hoop the pipe wall, anti adhesion

6, better alkali resistance soil metal and acid and alkali performance, excellent chemical resistance

7. It has good anti-ultraviolet and reactive oxygen species characteristics

8. The bending radius of the pipe wall is small, not easy to knot, and the weight of the pipe body is light

Summer has come, the annual hot weather has appeared again, we must be in the quasi this a way to relieve the heat, or is the fan, central air conditioning or air cooler.

To put it bluntly, air conditioning fans integrate the advantages of central air conditioning and electric fans. For example, central air conditioning blows out equipment wind, and it needs to be in a closed environment, which is easy to make people feel uncomfortable. Although the fan is a blower, if the surrounding environment is very dirty, the wind blowing out is also very dirty. And a large number of air conditioning fans are equipped with ash removal nets to filter air. If ash removal is on the Internet, there is a layer of nano-photocatalyst that can also play a sterilization effect.

The air conditioning fan is only 60-80W when the air conditioning is turned on and the refrigerator is the same, so it consumes power.

Cooling fan and cooling water cooling fan, for environmental protection and have a reputation as a mobile air conditioners, by special print area is very big wave pattern honeycomb paper fan, circulating water system with high efficiency and energy saving of the damp curtain, float switch hydrating pack cold, shell and electrical components, etc, also called cooling water cooling fan, is famous because its energy conservation and environmental protection; East China air cooler USES water evaporation absorb heat and cool in the hot air, of course, is in the physical evaporation cooling (cooling), and use it in our daily daily life has become so common that the feeling is very cool and refreshing when we stand on the shore, water daub on the skin surface wind will feel very cool, the cooling fan is the advantage of this weather phenomenon in east China, Combining intelligent and immediate evaporative cooling technology, we have developed a cooling fan (mobile environmental protection air conditioning or refrigeration unit) that integrates cooling, ventilation, environmental protection and energy conservation. Many years ago, it was used in the European region, abroad and the countries of the Middle East, into our time has been 10 years after. At present, China's production technology and processing technology has already been very perfect, it is more than central air conditioning saving electricity, available range, cooling the actual effect of good many advantages so it is accepted by more and more entrepreneurial enterprises. At this stage, the development trend of the whole market is excellent, and the price can be from more than 1,000 to 7,000 or 8,000 yuan a machine, most of which can meet the application requirements of each level. If the MANUFACTURER CAN do WELL after-sales maintenance service, short time application should be no problem, but in reliability and the difference on the use of time limit is very big however, this is mainly determined by the selected parts and components and the technical level of the manufacturer. In addition, the attitude of the operator is also a decisive factor.

With more and more post-90s entering the workplace for the first time, the professional environment has been valued by many people. Spring and winter are OK, but in summer the working environment of the production line is especially worrying, with smoke, foul smell, continuous high temperature and no ventilation........ Ventilation and cooling is very important, so why is it best to choose environmentally friendly air conditioning for cooling in the production workshop?

1. The exhaust air volume is large and the air supply is far away. The maximum exhaust air volume is 20000 to 60000 cubic meters in one hour.

2. Less power consumption, one hour electricity consumption is only 1 degree in the same total area of central air conditioning installation and evaporative air cooler, electricity consumption is only 1/10 of the central air conditioning

3. Good air quality integrates ventilation, ventilation, ash removal and cooling to improve oxygen content in indoor space and improve efficiency. Overall air supply or post air supply is randomly selected

4. Adjust the ambient humidity Adjust the humidity of the office where the air humidity needs to be increased

5. The actual cooling effect is strong in the south, the general cooling effect of 4℃~10℃, in the hot and dry region, the cooling can reach 4℃~15℃, and the cooling is fast, which is the real multi-purpose machine, environmental protection air conditioning is full of fresh wind operation, the server is generally installed in the factory production workshop outside, walk to the workshop to cool down, There will be no waste of plant space, and no noise will affect employees. It installation cost is not high, only 1/5 of the central air conditioning, and there is no requirement for the environment, whether open or closed site can be used, especially suitable for plant production workshop cooling and ventilation applications.