First: remove the wet curtain (a total of four parts, no particular order.)

1. Unscrew the three screws on the top of the wet curtain directly.

2. Hold the shutter on the top of the wet curtain, pull the wet curtain outward gently and lift it up slightly to remove the wet curtain.

Second: remove the cover of the machine and the general process of the water pipe.

1. Unscrew the screw in the cover directly, and then lift the cover up to get it.

2. Loosen the throat collar in the water supply pipe and loosen the water supply pipe, and lift the water distribution pipe up and take it.

Third: the cleaning of the water pipe.

1. If the hole in the water pipe is blocked, it can be poked empty with fine wire.

2. Clean the stains in the water pipe with warm water.

Fourth: car chassis and accessories cleaning.

1, cleaning the car chassis: you can use a soft cloth or brush to clean the car chassis.

2, clean the fan blade: you can wipe the fan blade with a soft cloth. Remember not to drop the dust in the fan blades into the air duct.

3. Clean the water level sensor: you can use a small wet rag to clean and wash the dirt in the water level line.

4, cleaning centrifugal water pump: you can use a brush to clean the centrifugal water pump and the dirt in the filter.

5. Clean the laundry discharge valve: pay attention to the stains at the bottom of the discharge valve.

Fifth: wet curtain cleaning.

1. Clean the wet curtain with warm water from inside to outside (note: the pressure can not be too high when cleaning, and it is forbidden to use acid-alkaline or alkali detergent to clean the wet curtain.

2, filter screen: filter screen can be removed once a week to clean. (only with filter model).

Sixth: Filter cleaning. The cleaning method is as follows:

1. Twist off the back cover of the filter device:

2. Eliminate the dirt in the filter element: install the back cover plate.

Seventh: after the completion of cleaning, install the whole equipment back in the reverse order of the removed process. (Warning: when cleaning the generator set, it is necessary to shut down and unplug the power supply, otherwise it will produce the danger of electric shock or other damage to the body of the generator set.

What are the important characteristics and application fields of large and medium-sized industrial air coolers? Large and medium-sized industrial air cooler can not only maintain indoor air quality neat, clean, environmental health, large and medium-sized industrial air cooler can also avoid dry air, etc. Large and medium-sized industrial air cooler is widely used in textile, mechanical equipment, porcelain, hospital outpatients, clinics, schools and other industries. The following large and medium-sized industrial air cooler Xiaobian to give you a detailed explanation of the relevant information! The characteristics of large and medium-sized industrial air cooler are mainly divided into the following aspects

1, large and medium-sized industrial cooling fan thoroughly energy-saving of large and medium-sized industrial cooling fan products: large and medium-sized industrial cooling fan is no compressor, no cold coal, zero pollution of energy-saving of large and medium-sized industrial cooling fan products, large and medium-sized industrial cooling fan is using the basic principle of all outdoor fresh air cooling air cooling and and conducting heat convection in the room ventilation in order to achieve the effect of natural ventilation and cooling.

2. The use cost of large and medium-sized industrial air coolers is low: large and medium-sized industrial air coolers can quickly recover the investment: Compared with the traditional compressor central air conditioning series products, large and medium-sized industrial air coolers only consume 1/8-1/10 of their electricity.

3, large and medium-sized industrial air cooler cooling effect is significant: large and medium-sized industrial air cooler in the humid southern region, generally can achieve a significant cooling effect of about 5-9℃; Large and medium-sized industrial air coolers in very hot and dry areas (such as the north and west regions), the cooling intensity of large and medium-sized industrial air coolers can probably reach 10-15℃.

4, large and medium-sized industrial air cooler project investment cost is low, does not account for the total building area: large and medium-sized industrial air cooler and traditional compressor air conditioning unit comparison, large and medium-sized industrial air cooler project cost is not half of it, and large and medium-sized industrial air cooler do not waste all the total building area.

5, large and medium-sized industrial air cooler to maintain indoor air quality neat, clean, environmental health: Windows open for ventilation system is one of the features of large and medium-sized industrial cooling fan, the fresh air in the hundreds of large and medium-sized industrial cooling fan than a conversion method to make people all the time in the natural environment, large and medium-sized industrial air cooler will be polluted air fully discharged outdoors, large and medium-sized industrial air cooler completely without the traditional central air conditioning don't adapt to the feeling.

6. Large and medium-sized industrial air cooler is easy to maintain and assemble: the system software is simple, and the large and medium-sized industrial air cooler is easy to assemble and maintain, without technical professional maintenance personnel.

7, large and medium-sized industrial air cooler to avoid dry air: large and medium-sized industrial air cooler can wet the skin, and have certain benefits to the skin.

8, large and medium-sized industrial air cooler low noise, small vibration: now in the same industry in China, the large and medium-sized industrial air cooler in low noise, large and medium-sized industrial air cooler can make us unknowingly get fresh and elegant cold air; The human body of large and medium-sized industrial air cooler does not emit heat nearby.

Characteristics of industrial production air cooler

1. Thoroughly energy saving commodity: it is actually the most refrigeration compressor, no cold coal, zero pollution of energy saving enterprise products, this is the use of outdoor fresh air evaporation refrigeration principle cooling and heat convection ventilation in the room to achieve the goal of natural ventilation cooling.

2. The use of low cost, can quickly recover the investment: compared with the traditional refrigeration compressor central air conditioning series products, the power consumption is only 1/8-1/10.

3. Significant cooling effect: in wet and cold areas (such as the southern region),- can achieve significant cooling effect of about 5-9°C; In very hot and dry areas (such as northern areas, northern areas), the cooling intensity can probably reach 10-15°C.

4. The project investment engineering cost is low, no total building area: compared with the traditional refrigeration compressor air conditioning unit, the project cost is less than half, and the group of machinery and equipment do not waste all the total building area.

5. Always stay neat and clean indoor air quality, environmental health: Windows open for ventilation system is one of the features of evaporative air conditioning type machine, the air than a conversion method to make people all the time in the natural environment, completely without doesn't suit brought by the traditional central air conditioning, foul air outdoor.

6. Easy maintenance and assembly: the system software is really, easy and convenient assembly, maintenance, without technical professional maintenance personnel.

I. Maintenance of outer packaging

In the process of transporting the equipment, the most basic protection work must be done to prevent the impact and pressure. In addition, it must be handled carefully during delivery, otherwise it will not be good if there are some bumps. Ningbo air cooler Cixi air cooler

Two, inspection and maintenance

In each use, it is necessary to check the daily maintenance work, for example, the rolling bearing part must be immediately added with lubricating fluid, which is also a basic principle to ensure the super performance of equipment, including louvered curtains, motors and so on.

Three, the working voltage

The working voltage of the air cooler machine should also be effectively controlled according to its own regulations, which is also the most basic regulation.

4. Seal up the natural environment

In the daily sealing link, it is necessary to place the living environment of dry and irritable insulation layer, otherwise the metal component is very easy to be affected by environmental hazards and abnormal.

Key points of installation:

First, if conditions permit, try to install the air cooler to the dominant position;

Two, environmental protection air conditioning as far as possible hung wall installation, installation position below can not be placed raw materials, do not have to be installed in the water vapor, odor or odor vapor produced around the outlet, such as: steam sewage outlet, bathroom, restaurant kitchen, etc.;

3. If the temperature reduction room does not have a certain door or window (single version of 2 square meters), it is necessary to install a special strong smoke exhaust fan in addition, and the displacement should ensure that the total air supply and exhaust volume of environmental protection air conditioning is above 70%;

Four, to ensure that the installation of sound card frame structure can support all environmental protection air conditioning servers and air ducts and installation staff more than twice the net weight, to ensure engineering and safe use;

Five, the server must be installed horizontally, do a good job of strong wind prevention measures, the installation of the support frame must be able to bear more than 250kg dynamic load, more than 3 meters from the ground to install the support frame need to add fence. Seepage water is best to use drinking water, water must be kept clean, if the water solid should choose a water purifier to filter and become soft, drainage pipe should be connected to the sewer pipe, and keep smooth.