Hot summer high large and medium-sized workshop temperature reduction using what cooling equipment just can realize the role of the dream? Especially in some heavy industrial city, every summer is to meet continuous high temperature, the temperature of the heat, industrial workshop cooling is thinking, workshop cooling equipment selected by the way, the wasted effort, with half of the struggle to get double the conclusion, now most of the shop will choose assembly water cooling fan for cooling equipment.

The gas water cooler is a kind of machine and equipment that integrates natural ventilation, cooling and ash removal according to the basic principle of evaporative heat absorption. Only 1 KWH of electricity per hour, the air supply and exhaust volume can reach 16,000-18,000 cubic meters. In addition, it can adjust the environmental humidity according to the requirements of some unique workshops. Environmental protection air conditioning can purify indoor air at the same time of ventilation and temperature reduction. The attached wet molecular structure in the fresh air transported by industrial water-cooled central air conditioning can absorb dust particles in the air to avoid harmful things that harm people's physical and mental health. If you still do not know which kind of machine equipment should be used, why don't you try industrial energy-saving environmental protection air conditioning.

Air cooler is widely used in natural ventilation and temperature reduction in various fields. It is a ventilation equipment with water as the media, zero pollution and the freshest gas. The air cooler can reduce the temperature of the workshop to a comfortable temperature. It uses the basic principle of digestion and absorption of heat and humidity in the air when water evaporates to reduce the temperature of the gas. The effect is very good and the energy consumption is low. So what are the steps and common problems in the application of air cooler?

1. The application procedure of the air cooler: when the temperature is high and the temperature in the workshop must be reduced, open the air leakage switch and press the "cooling" button immediately, and there will be a one-minute delay (when the centrifugal pump cools the water curtain and seeps water), which is normal. The unit will return to normal operation in one minute. When the temperature is low, press the "exhaust" button at the same time to send fresh air into the room to carry out ventilation work.

2, cold wind machine: press the "stop" button, the equipment timely shutdown (such as long-term use, turn off the gas switching power circuit).

3. The two layers of filter screen connected to the air cooler should be cleaned once a month to 2 months according to the external natural environment, in order to prevent the blockage of the air supply from harming the service life of the motor.

4. The "clean" key of the air cooler is used to clean the car chassis and remove and replace fresh water. Super glue and fishy smells may occur when new apps are being used. Wash them daily for the first week to half a month. It is usually cleaned every 2-3 days. In actual operation, press and hold the "Clean" button, and the server enters the cleaning condition (automatic drainage pipe and water seepage). After three minutes, the server will turn off the drainage pipe and enter the standby state.

5, air cooler water resources should be open for a long time, and there is more than 1.5Kg/cm2 water pressure. When the unit operates, if there is no actual cooling effect, first check whether there is little water (the light is on), and then check whether there is water stored in the inlet, whether the tap water tap is turned off, and the water pressure is not enough.

6. The air conditioner evaporator needs to be cleaned once the air conditioner unit operates for more than one year. The water pressure should not be too high when cleaning, so as to prevent the damage to the air conditioner evaporator and reduce the service life of the air conditioner.

Air cooler itself has a very common use, industrial production, agricultural breeding, freezer temperature reduction are very suitable.

Industrial-grade is a cliche, and I won't talk more about it here. In the agricultural breeding industry, such as animal husbandry and poultry industry, some people may not grasp it. The simple air cooler equipment in the breeding plant will further improve the refrigeration efficiency of poultry breeding.

Nowadays, global warming has become the norm, autumn and spring days are getting shorter and shorter, summer is getting longer and longer, more and more hot, we not only the sun is hot, animals can not bear the high temperature. As a result, animals in zoos, large farms, and poultry farms gradually suffer from high temperature, moderate disease, and even death.

High temperature is easy to cause infectious disease, this is cause feeding individuals and units serious social, economic and physical damage. Therefore, the culprit - high temperature objects become everyone to try to suppress the renovation of the target. Therefore, only the cold wind first appearance of the unit. Compared with general temperature reduction commodities, it has faster thermal conduction effect, central air conditioning cold air unit, lower initial investment cost, low operating cost, and more suitable for the cooling requirements of large and medium-sized sites. Cooling fan is better than other types of refrigeration equipment has a distinctive advantages, can better into aquaculture industry optimization refrigerating equipment.

If it takes a long time to transport, we should take some protection measures to prevent the products from being damaged when they reach the customer. In this regard, we should protect the air cooler packaging outside, and put it vertically when placed, so as not to be affected by heavy pressure and collision. Movers should be handled gently to avoid product damage. We should check the machine before the product is installed and running. Add more lubricating oil to the bearings. We should pay attention to the blades on the fuselage, blinds and other dust on the cabin, but also pay attention to the voltage of the air cooler. The power supply of the air cooler should meet the specifications above when the air cooler is in use. A deviation of the voltage can exceed 10 of the rated voltage. We can open the shutters with an external force when the air cooler stops working. This is to prevent a close fitting of the blinds.

In short, in general, the air cooler is not packaged. In special transportation environment, it is necessary to pack well to prevent the product from being damaged in the process of transportation.