Air conditioning fan is not air conditioning, it is just named "air conditioning fan, air cooler", in fact, and air conditioning is not too big a relationship, the air conditioning fan with water is actually better cooling effect of the electric fan, long-term use or pay attention to the impact on the body.

Air-conditioning fans, cooling fan is put through the ice, or water into it, use the fan to blow out cool wind cooling, air-conditioning fans, no refrigeration effect actually, because there is no compressor, air-conditioning fans and ice melting of water and water vapor will take away heat, increase the humidity of the air so as to achieve the cooling effect.

An electric fan equipped with a water-cooled device that cools the surrounding air by circulating water through the machine with a built-in pump, so that the air sent out by the fan has a cold feeling. In summer, the air is hot and humid, and the cold air will inevitably form condensed water at the outlet. It is also because of the cooling characteristics of the air conditioning fan, and the use of the air conditioning fan will increase the air humidity.

Summer is hot, if the environment is too wet is actually conducive to the breeding of bacteria, bacteria will circulate in the air with the cold air blown by the air conditioning fan, because the elderly and children with poor immunity should try to use less or do not use the air conditioning fan, to avoid the influence of high humidity on the body.

Conclusion:

However, it still needs to be divided into situations. The environment used is very open in factories, garages, warehouses and outdoor operations. In order to get a better cooling effect, it will even use industrial level air conditioning fans.

The air cooler is a kind of evaporator, whose function is to vaporize the saturated refrigerant of low temperature and low pressure from the thermal expansion valve of the cold storage through the heat exchange between the air cooler and the cooled medium to vaporize the saturated refrigeration and take away the heat in the cold storage, so as to realize the refrigeration effect.

According to the classification of cold storage evaporator, the cold storage evaporator in China is mainly composed of two types: air cooler and exhaust pipe. The cold storage with the air cooler as the evaporator is called the air cooler storage, and the cold storage with the pipe as the evaporator is called the cold storage with the pipe. Comparing the advantages and disadvantages of the air cooler and the exhaust pipe, whether the air cooler or the exhaust pipe is selected in the cold storage, there are still their own needs and specific markets

Note that the air cooler mentioned above is mainly used in cold storage, which is different from the conventional air cooler in the factory floor.

Yuyao Jiayun Environmental Protection Technology Co., Ltd. is a professional air cooler. Chiller and other cooling equipment of high-tech enterprises, and has formed a collection of research and development, design, manufacturing, installation, maintenance as one of the scientific research economic entity. Main products: Yuyao air cooler, Cixi air cooler, air cooler accessories, negative pressure air cooler and other refrigeration equipment.

Since the establishment of the factory, we are committed to the expansion of energy conservation and environmental protection, and with the purpose of quality assurance, innovation and excellence, strict requirements in raw material procurement, product research and development, manufacturing, construction and installation and after-sales service, so as to achieve the stability and improvement of product quality. With high quality products and perfect service, we wholeheartedly provide our customers with advanced technology, effective and low consumption, reliable and stable products. Jiayun is willing to bring you a cool space and create a better tomorrow.

The application range of air cooler is very wide, and it is widely used in workshops, factories, Internet cafes and other places of all walks of life. Cooling fan running at work, outdoor hot air through the filter unit, and then after wet shelter, cooling and oxygen is high, the strong cold air flow through the duct to the workshop, workshop space pure and fresh, ventilation cooling, air in air pressure increases the size of the old workshop through the doors and Windows, discharge, outdoor air in the workshop has air conditioning, About 20 times per hour or more of the overall air ventilation rate in the workshop to make the hot air, dust, odor discharge, make the air quality in the workshop fresh and comfortable and achieve cooling effect.

It is worth mentioning that the cooling effect of the air cooler is directly related to the air flux. Compared with the traditional air conditioning, the air cooler has a very different unit, that is the air flux. So is it true that the greater the ventilation, the better? Of course not.

Different places, the amount of ventilation required will certainly be different. In general places, the number of ventilation required is about 25-35 times/hour. The general places referred to here are those places with low traffic and no heating equipment, such as conference rooms, etc. At this time if magnify the number of ventilation, it is a bit of a waste of suspicion. For those crowded places, the required number of ventilation is about 30-40 times/hour. If there is heating equipment in the production workshop, then how to have 50-60 times/hour of air change.

The main purpose of the energy-saving cold air machine is to make the air in the workshop timely update and the humidity conditioning, the improvement of air quality, and the human body can absorb fresh air in time. Thereby determining human health. Let's start by understanding the sources of air pollution.

Workshop air has two sources of pollution, it is people use carbon dioxide, from exhaled carbon dioxide concentration in the human body to nearly 40 times higher than the natural concentration in the atmosphere, when 0.2% of carbon dioxide concentration in the air, will constitute a harm to human body, the second pollution sources are machinery and equipment at work a smell to smell and the product itself, People have a kind of compliance to the gas and smell fatigue phenomenon, living in the workshop for a long time, the indoor atmosphere will not feel out, according to scientific experiments, in order to make the workshop gas does not exceed the degree of harm to human health, it is necessary to keep the workshop air fresh.

The air cooler can solve the trouble of sultry and peculiar smell for you. If you use the fan and central air conditioning, it is impossible to perfect the solution to this problem. Fan is short of refrigeration, ventilation and ventilation effect, is the wind blowing out hot, said the pack fan weather in the south is also can't do any improvement, with the high cost of central air conditioning costs, electricity is also a expensive digital, also cannot achieve the effect of ventilation and ventilation, because the central air conditioning is negative pressure, doors and Windows are closed. The air is not moving. So the refrigeration is solved, but the odor is not solved. So no matter from which aspect to consider, the choice of energy-saving air cooler is the most sensible.

1. The installation personnel of the side wall outdoor air cooler should have a certain slope. The outdoor air hose installed on the roof must also do a good job of waterproof measures. Long pipe according to different design, air flow into multiple sections of different specifications of the pipeline, the use of reducer pipe connection, reducer pipe set not too much, generally not more than 4 overall system, the length of the reducer pipe ≥2(DD) to determine. The air conditioning cooler duct is connected to the application software nozzles. The outdoor air supply pipe should be insulated. Internal insulation is usually not necessary.

2. The outlet is set in a cool place where the actual need is. The outlet is the design air volume of the cooling air volume that is required. When the average speed of the air throat is controlled from 3-6m/s to 4-5m/s, it is recommended to use the flow; It is recommended to install the air in the outlet valve to adjust the air flow.

3, air supply pipe specifications generally assume that the speed should be maintained at 3-5M/s, used for the design of the main air duct speed to maintain at 6-9 m/s, branch pipe 4 m/s, the system of wind speed in the pipe end method. Low (70 Pa -500Pa) air supply piping system design characteristics should not be too long, the layout, can not be without the local pipe pipe.