In environmental protection products, industrial air cooler is one of them. Then how much do you need to know about the five characteristics and devices of industrial air cooler? Today, I will introduce you to the five characteristics and equipment of industrial air cooler.

1. The main characteristics of industrial air cooler (1) can be completed green environmental protection, and simply will not pollute the ambient air. In addition, the cooling effect is very obvious. For different regions, there can be an appropriate cooling range to stop the stability of temperature.

(2) From the point of view of its operating cost and investment benefit, the industrial air cooler is also very good, which can have a better investment recovery and a lower operating cost.

(3) in terms of cost, compared with the traditional air conditioning system, it can be effectively reduced, and some can be reduced to less than half.

(4) the operation of industrial air cooler is simple, the maintenance workload is less and it is easy to stop. Do not need professional maintenance personnel, but also can stop some of the simple problem disposal.

(5) in the process of operation, the noise and vibration of the industrial air cooler are small, and the body itself will not heat away from the surrounding, so as to prevent overheating.

In general, the industrial air cooler device is better than the outdoor air cooler device. If the ambient air quality is good, this is a great advantage to it. However, it can not be used in the air return mode, because it may present problems. As for the air duct, it should be prevented from long through long, and it is better to control it at 15 to 20 meters. In the use of elbow, to reduce as much as possible, and even not.

    Evaporative cooling fan is an evaporative cooling and ventilating unit that integrates cooling, ventilation, dustproof and deodorization. Evaporative cooling fans can bring fresh air to the company's workshops, public places, and commercial and entertainment venues.

    However, when we choose the chiller, we must pay attention to some details. Wujiang Weisheng water board is formed by high-strength engineering plastics. The water distribution method is also a natural flow phenomenon that uses water to flow low. The plate is slanted and has a total of 30 grooves on the top. The clean water conveyed by the conveying system passes through the distributor, and the water flows uniformly along the groove to the evaporating wet curtain to ensure that the evaporating wet curtain fan is completely wet.

    When we are using the chiller, we must pay attention to some details. For the water distribution system, we need to strictly control it, instead of creating one. If the chiller system uses a tubular water spray structure, it will easily occur after a period of use. The scale is clogged, which causes some unevenness in the water distribution system. Another point is that the quality of the water is also very high. If the water quality is not ideal, it is more likely to cause water blockage, which seriously affects the cooling effect. I recommend consumers here. Use Weisheng air cooler.

Evaporative cooling fan maintenance

    How to make the evaporative chiller achieve maximum efficiency? How to operate more efficiently, safely and economically? The maintenance of this evaporative chiller is an important task. Today Weisheng is talking about evaporative type. Some maintenance knowledge of the air cooler, interested friends can come in and find out.

    1. After the evaporative system is operated for a period of time, the filter will accumulate dust and increase the air resistance. The air conditioner indoor unit leaks, thus causing the air volume to decrease or block, so it needs to be cleaned regularly.

    2. After long-term operation, due to the heating of wires and components, the joints may be loosened and the second-hand air conditioner may be detached, resulting in poor contact and lack of phase, which needs to be regularly inspected and processed.

    3. Accidents caused by failure of protection devices such as water flow switches, high and low voltage switches, safety valves, etc., should be replaced in time if found.

Note: When the evaporative cooling fan is being repaired, be sure to turn off the power. It is better to turn off the power for a while, because static electricity will be generated for a long time, and the static electricity will not disappear immediately after the power is cut off. Overhaul.

Industrial air cooler is a workshop ventilation and cooling equipment that will be used by many factories. The principle of its work is to send the air outside the workshop into the workshop after inhalation. Generally, the good situation can reduce 4-15 degrees Celsius, and the bad situation can also have a cooling effect of about 7 degrees Celsius. Industrial air coolers absorb sensible heat in the room by wetting the external air, so as to achieve a variety of purposes such as cooling, ventilation and ventilation. This cooling equipment is very suitable for places with dense high temperature people.

Industrial air cooler, as its name implies, is a machine that can produce cold air, which is mainly used for industrial cooling. However, different from air conditioning, industrial air coolers use compressors for cooling and refrigeration. They use more simple and effective water evaporation cooling, which is very power-saving. It only consumes one kilowatt-hour electricity, and can reduce the temperature of about 5-10℃ for a range of more than 100 square meters. And if the range is too large, you can combine other equipment to achieve a better cost-saving cooling effect.

The cooling effect of industrial air cooler for different areas is often different, if it is in a relatively humid area, the cooling effect is about 5-9℃; In drier places, the temperature drops a little better, reaching more than 10 degrees. And industrial air cooler can be used in a semi-open closed environment, there will be no sense of adaptation brought by traditional air conditioning, can circulate the air, is a more suitable cooling and ventilation equipment.

Perhaps many people think that chillers will feel strange, but air-conditioning fans and water-conditioning believe that many people will be more familiar with them. In fact, these three belong to the same product. The air cooler was introduced to China more than 10 years ago. It is mostly used for refrigeration in supermarkets and factories. In recent years, domestic air coolers have also been used more and more. At present, the market competition of chillers is becoming more and more fierce. Some manufacturers do not distribute dust-proof nets to customers in order to control the cost and obtain more profits. So the air filter is essential for the air cooler, or is it optional?

The air cooler can achieve air convection while cooling, bringing fresh outdoor air into the room. There will be a lot of dust in the air. When the air is exchanged, the dust will inevitably be brought in. The larger dust particles can stay outside the curtain, but the small dust will follow the airflow into the room. The quality of the indoor air slowly becomes very poor. However, if there is a dust-proof net, the outdoor air can remove a part of the large dust impurities through the filter of the air filter, and the small dust can be filtered out when passing the wet wet curtain, so that the air enters. There is little dust in the room, and the quality of the air can be guaranteed. Yuyao air cooler, Cixi air cooler

The air filter can also extend the life of the wet curtain, especially in the textile mills and garment factories. This is a dust-proof net that can block the wool, fibers, etc. in the factory from outside, and avoid blocking the air inlet of the wet curtain. If there is no protection from the air filter, the blocked curtain will not only affect the air intake but also cause the motor to burn out.