Mobile air coolers are widely used in workshops, so what is the effect of mobile air coolers in the workshop? Let's follow along with the editor:

    First, it can save a lot of industrial water. The mobile cooler uses cold medium as a carrier for air cooling, and there are many sources of this carrier, such as cooling water and chilled water. Because there are so many media and carriers, it will be reduced to a certain extent. The amount of industrial water is used, and a large amount of industrial water is saved. Therefore, industrial water consumption can be effectively saved.

    Secondly, mobile coolers can effectively reduce pollution and protect the environment. In the modern era that pays more attention to environmental protection, people will consider its environmental protection factors when using any machine. It is such a relatively environmentally friendly machine. It is a heat exchanger that uses air to cool hot fluids. Large pollution, and can effectively protect the environment.

    Third, it has a better market prospect. The key to the use of a machine lies in its future development potential and space. Wet curtain air coolers have a broad market prospect and also have a large development space in the industrial field. They can be used in future industrial production and life. To important role.

With the development and promotion of mechanized products, many things have been universally mechanized, and coolers are one of the most popular products. There are some precautions you need to know when using this air cooler device for ventilation!

     (1) Avoid short circuit of fan ventilation. Do not install the fan on the wall. The lower side is the door to make the air flow short circuit.

     (2) If single-sided exhaust is adopted, the exhaust vents adjacent to both sides should be set on the opposite side to avoid one exhausted turbid gas being immediately sucked in by another fan;

     (3) Try to make the air flow pass through most of the space in the house, especially the corners of the wall, and do not cause dead ends to achieve the purpose of ventilation.

     In order to ensure better use of the cooling fan, these issues need to be understood clearly, so that the fan can also play a protective role.

People who use subcoolers know that the cooling effect of the cooler is very good, and its effect is comparable to that of air conditioners, and in terms of energy saving, it is more than a little bit stronger than air conditioners, so when many people choose refrigeration to stir up Air conditioners are often given priority. When selecting the air cooler, you need to choose the film spacing. Many people don't understand the selection of the film spacing. Let me introduce it to you below.

      Choice of air-cooler space

      Air cooler As the evaporator commonly used in refrigeration systems, its proper selection directly affects the efficiency of the refrigeration system. As we all know, the chiller will use different fin spacing according to the required ambient temperature. In our common air cooler, the fin spacing is 4mm, 4.5mm, 6 ~ 8mm, 10mm, 12mm, and there is a variable pitch between front and back. The fin spacing is small, suitable for high temperature environment; the lower the temperature of the cold storage, the larger the fin spacing required. If the selection is unreasonable, the fins will be frosted fast, and the wind passage will be blocked soon. It is difficult to cool the cold storage, and the efficiency of the compressor cannot be exerted, resulting in increased power consumption of the refrigeration system.

      According to engineering experience, generally 0 ℃ ~ 20 ℃ environment, such as workshop air conditioners, cool storage, cold storage wear hall, fresh storage, air conditioning storage, ripening storage, etc., choose the 4mm or 4.5mm air cooler; -16 ℃ In the environment of ~ -25 ℃, such as low-temperature freezing and refrigerating, low-temperature logistics warehouse, the air cooler with a slice distance of 6mm ~ 8mm is selected; and the quick-freezing warehouse of -25 ℃ ~ -35 ℃, generally use a cooler with a slice distance of 10mm and 12mm. If the fast-frozen cargo has high humidity, the variable blade is selected from the cooler, and the distance between the fins on the inlet side can reach 16mm.

      However, in some occasions, the fin pitch of the cooler cannot be selected based on temperature alone, such as rapid pre-cooling and acid removal of meat and vegetables. Although the temperature of the cold room is generally set above 0 ° C because of the high incoming temperature and cooling Fast speed and high humidity of the goods. If the air cooler with 4mm or 4.5mm space is used, it is not suitable. It is necessary to use an air cooler with 8mm or even 10mm space.

      There is also a fresh-keeping store similar to the storage of fruits and vegetables such as garlic and apples. The suitable storage temperature is generally -2 ° C. Such a fresh-keeping or modified atmosphere store with a storage temperature below 0 ° C also requires the use of cold air at a distance of not less than 8mm. Machine to avoid rapid air-frosting that can cause blockage of the air duct and increase power consumption.

    Among the environmental protection products, the industrial air cooler can be regarded as one, and its use is similar to that of ordinary air coolers, which are used to achieve the purpose of ventilation and cooling. Then, through different aspects, we have a preliminary familiarity and understanding of the industrial air cooler, in order to distinguish it from the ordinary air cooler. Ningbo air cooler, Ningbo cold air

    Why is the industrial air cooler an environmentally friendly product? This is because such a chiller does not have a compressor and a refrigerant, and does not cause environmental pollution. Therefore, this chiller is classified into the environmental protection category. In principle, the method of convection ventilation is used to ventilate and cool the room to achieve the desired temperature and humidity.

1. The main characteristics of industrial air coolers

    (1) It can be green and environmentally friendly, and it hardly pollutes the ambient air. In addition, the cooling effect is very obvious. For different regions, there can be a suitable cooling range to stabilize the temperature.

    (2) From the perspective of its operating costs and investment benefits, industrial coolers are also very good, with better investment recovery and lower operating costs.

    (3) Compared with the traditional air-conditioning system, the cost can be effectively reduced, and some can be reduced to less than half.

    (4) The industrial chiller is simple and convenient to operate, requires little maintenance and is easy to carry out. No professional maintenance and repair personnel are needed, and some simple problems can be handled.

    (5) During the operation of the industrial air cooler, the noise and vibration are small, and the body itself will not dissipate heat to the surroundings, which can avoid overheating.

2.Instructions for the installation of industrial air coolers

    Generally speaking, it is better to install industrial air coolers outdoors. If the ambient air quality is good, it will be of great benefit to it. However, it cannot use the return air method because problems may occur. For the air ducts, it should be avoided to be too long, it is better to control it to 15-20 meters. The use of elbows should be minimized or even not used.

    Through the above two parts, we can clearly know what the characteristics of the industrial air cooler and some must-know contents on the installation, so that it can be used in actual operation to improve its performance and effect. From another perspective, these are also necessary prerequisites and preparations for in-depth discussion.

 Ningbo Stock Recovery Terminal Machine Vibration Plate