Friends who have purchased a cooling fan know that there is a filter inside the air-cooling machine, but many friends do not know what the role of the filter is. Even some chiller manufacturers do not distribute the corresponding dust-proof net to the customer in order to reduce the cost. . So what does the filter do?

    Since the environmentally-friendly air conditioner is sent to the indoor air by the fresh air of the outdoor air, a large amount of large particles of dust and impurities are covered in the water curtain during the process of ventilation and cooling of the outdoor air through the wet curtain into the room. On the outer surface, some small particles of dust impurities enter the room with the airflow.

    In this process, if there is a dust-proof net, the air containing the large dust impurities can be filtered and lost through the dust-proof net, and then the fine dust impurities are filtered again through the wet wet curtain to reach a clean air effect.

    It can be seen that the filter of the air cooler is still necessary. When using it in peacetime, it is recommended that you clean it regularly so that the filtering effect will be better.

The use of the air cooler effectively maintains the circulation of air in the shed, thereby reducing odor and reducing temperature. Let's take a look at the two ways of exhausting chillers: Ningbo chiller, Ningbo chiller

First, local exhaust ventilation

Where the pollutants converge in a concentrated manner; the state of divergence is in a low aerodynamic state

For the characteristics, or pollutants such as dust, aversion, etc., need to be collected at a flow rate of 8 meters per minute, the chiller is suitable to use this ventilation control method. With this control method, a small chiller or shaft is required. The flow fan draws it out quickly.

Second, comprehensive dilution ventilation

Fully diluted ventilation requires several cooling fans or axial fans or circulating fans to continuously pump external clean air, continuously flushing the factory pollution, so that the volatilization and accumulation of air pollutants in the production process will not reach dangerous ratio or safety level. The dilution ventilation control method is suitable for the occasion where the factory air pollutants are generally divergent rather than concentrated at several original points, and also when the local divergence has escaped to the factory air.

For the chiller, I believe that everyone is no stranger, so there are reasons to learn, so as to achieve a comprehensive understanding of this goal. So, what kind of knowledge should we master for the product of chiller? This confusion, Chongqing chiller manufacturers Shanghai Lin will come to solve, and bring you some new content. Ningbo City Air Cooler, Ningbo Air Cooler

   1. What is the specific high efficiency cold air blower? The traditional high-efficiency air cooler, for this type of air cooler, the introduction of the chiller manufacturer Hulin is: This type of air cooler is a kind of machine that can output the cooling capacity, so it is widely used in the refrigeration system. Its composition includes two cooling coils and an axial fan. The axial convection fan is used to perform forced convection heat transfer of the air to cool the air to achieve the purpose of cooling.

   2. The environment requirements of the chiller, for the chiller product, it also has the corresponding use environment requirements. Therefore, the chiller manufacturer Hulin will elaborate for you.

   Ambient temperature: 18 ° C - 45 ° C

   Relative humidity: no more than 85%

   Use atmospheric pressure: 86Kpa-106Kpa

   Use water quality: The water used should be softened and the water temperature should not exceed 45 °C. The water supply pressure is 0.15 MPa to 0.6 MPa.

   Cell voltage: For voltage deviation, it is required to not exceed 10% of the rated voltage.

   Use environment: In the use environment, there should be no corrosive substances and gases to avoid corrosion.

   3. Some important points of attention of the air cooler

   For the important point of attention on the chiller, in the view of Wuxi chiller manufacturer Hulin, the specific is:

   (1) Before using the air cooler, check whether the inlet pipe and the drain pipe are connected correctly and well, and whether there are any problems such as leakage and leakage.

   (2) For some machine parts, when the chiller is working, it cannot be disassembled. If disassembly or overhaul is required, the equipment must be powered off and then carried out to avoid danger. If the environment is harsh, you can increase the filter to improve the use.

我公司的蒸发型冷风机，体现了节能，人性，外观，环保等特性，为电子，纺织，制鞋，塑胶，机械车间，卷烟厂，现代家君，办公室，超市，医院，娱乐场，候车室等环境的通风降温提供了完美的解决方案。

蒸发型冷风机与中央空调机的优点：

1，蒸发型冷风机是利用水蒸发制冷，送风距离远，风量大，能使封闭式的场所温度分布均匀，兼具过滤功能。令室内环境舒适，含氧量高，空气清新，而传统中央空调是直接利用氟里昂制冷，送风温差大，风量小，房间温度不易均匀。且通风换气功能差，不适合半封闭式场所，若多次使用易得“空调病”。

2，蒸发型冷风机能耗比传统中央空调长一倍，总体故障率低，设备维护简单方便。

蒸发型冷气机一次性投资小，而且总体运行效率高，运行费用省，以2000平方米的空间为例，用蒸发型冷气机主机20台，以一小时满负荷计算，运行电量为20KW，传统中央空调（180匹）每小时运行电量为180KW，按每天运行10小时算，每月能节省48000元电费。节能达89％，蒸发型冷风机介绍

蒸发型冷风机，实现了节能，人性，外观，环保等特性，为电子，纺织，制鞋，塑胶，机械车间，卷烟厂，现代家庭，办公室，超市，医院，娱乐场，候车室等环境的通风降温提供了完美的解决方案。

蒸发型冷风机特点：

1，完全环保型产品：它是无压缩机，无冷煤，无污染的环保型产品，这是利用整体全新鲜空气蒸发冷却原理降温并与室内进行对流换气从而达到通风降温的目的。

2，运行成本低，可快速收回投资：与传统压缩机空调系列指标，耗电量只有其1 / 8-1 / 10。

3，降温效果明显：在较南部地区（如南方地区），一般能达到5-10℃左右的明显降温效果；在特别炎热干燥地区（如北方，西北地区），降温幅度大约能达到10-15 ℃左右。

4，投资造价低，不占用建筑面积：与传统压缩机空调系统比例，造价不足其一半，并且设备不占任何建筑面积。

5，保持室内空气清洁，清洁，卫生：门窗敞开进行排风是蒸发型冷气机的一大特色，百分之百的新鲜空气更换方式使人们时刻处于大自然的环境中，完全没有传统空调带来的不适应感，将污浊的空气排出上方。

6，易于维护与安装：系统简直，便于快捷安装，维护，无须专业维护人员。

7，防止空气干燥：它可以湿润皮肤，并且对皮肤有一定的好处。