Energy saving and environmentally friendly air conditioners (evaporative air conditioners, water-cooled central air conditioners) may have a longer lifespan and a good cooling effect in the factory, as long as the maintenance method is appropriate. What are the reasons for the frequent occurrence of industrial production fan failures? How should everyone maintain and maintain it?

1. If there is significant environmental pollution around the air conditioning unit, it is recommended to clean the server once or twice a day to ensure that the air conditioning unit is fresh and tidy. It is recommended to use fully automatic function mode for operation.

2. After six months of operation of the unit, the basin and its evaporative substances should be cleaned once, and the pressure during cleaning should not be too high to prevent damage to the cooling water curtain.

3. When stopping use for a long time, in order to avoid damage to the human body and mosquito growth caused by freezing and cleaning, the water inlet valve of the drinking water equipment should be turned off, and the unit should be called into the cleaning method. The remaining water in the water storage tank basin should be drained. When shutting down, the server needs to be tightly covered with a soil net and clamped to prevent residual flowers from blocking the evaporation of substances in the late winter wind and sand.

4. When repairing the air conditioning unit, be sure to turn off the power supply of the control cabinet. Maintenance workers should hang maintenance signs inside the unit to prohibit turning on the power supply.

5. When the unit of the air cooler trips due to a fault, it must first clear the fault and then press and hold the air leakage switch.

6. The first time using it, there is a smell of wood residue, which dissipates after 24 hours of persistent use.

7. Rainproof blinds cannot withstand force, and it is prohibited to use the blinds as support points and move them by hand during use or under this premise.

8. Memory rechargeable batteries need to be carefully replaced after 2 years.

9. The server base should be treated with anti-corrosion and rust prevention measures in 2 years, preferably painted. Regular safety checks should be conducted on the robustness of the main frame every year.