News Detail

——

Product characteristics and working principle of industrial air cooler

Cooler, through continuous learning, we have a preliminary understanding and understanding of it. Well, the industrial chiller in the chiller may not be familiar to everyone, so it is necessary to study, and at present, there are still many applications of this chiller. With a comprehensive understanding, we can make the best use of it without causing waste.

    Industrial cooler, from the perspective of industrial cooler manufacturers, is a very good environmental protection product, because it has no compressor, no refrigerant and no pollution, it can completely meet the green environmental protection standard. Moreover, compared with air conditioners, it can reduce the cost and reduce the occupied area, but it can achieve the same ventilation and cooling effects. Therefore, in terms of performance, industrial air coolers are slightly better.

    1.Working principle of industrial air cooler

    When an industrial air cooler works, air enters its interior, creating negative pressure. When the dry bulb temperature at the outlet of the cooler is lower than the outdoor dry bulb temperature, a temperature difference is formed. Moreover, the larger the temperature difference, the more obvious the cooling effect. Therefore, through the continuous introduction of air, the indoor air can maintain freshness, thereby achieving the purpose of ventilation.

    2. The main characteristics of industrial air coolers

    (1) It has a low operating cost and can save a lot of power compared with an air conditioner with a compressor, which only needs one-eighth to one-tenth of that.

    (2) The cooler has a good cooling effect, especially in hot and dry areas, and its cooling range can reach about 10 to 15 degrees Celsius, which can be said to be very obvious.

    (3) The industrial air cooler is easy to install and maintain, even if it is not a professional, it can perform its installation and other tasks.

    (4) This kind of air cooler has low noise and small vibration during operation. Relatively speaking, its operation is very stable and reliable. In addition, because its body does not dissipate heat to the surroundings, it does not increase air temperature, and it does not experience problems such as local overheating.