For the chiller, I believe that everyone is no stranger, so there are reasons to learn, so as to achieve a comprehensive understanding of this goal. So, what kind of knowledge should we master for the product of chiller? This confusion, Chongqing chiller manufacturers Shanghai Lin will come to solve, and bring you some new content. Ningbo City Air Cooler, Ningbo Air Cooler

   1. What is the specific high efficiency cold air blower? The traditional high-efficiency air cooler, for this type of air cooler, the introduction of the chiller manufacturer Hulin is: This type of air cooler is a kind of machine that can output the cooling capacity, so it is widely used in the refrigeration system. Its composition includes two cooling coils and an axial fan. The axial convection fan is used to perform forced convection heat transfer of the air to cool the air to achieve the purpose of cooling.

   2. The environment requirements of the chiller, for the chiller product, it also has the corresponding use environment requirements. Therefore, the chiller manufacturer Hulin will elaborate for you.

   Ambient temperature: 18 ° C - 45 ° C

   Relative humidity: no more than 85%

   Use atmospheric pressure: 86Kpa-106Kpa

   Use water quality: The water used should be softened and the water temperature should not exceed 45 °C. The water supply pressure is 0.15 MPa to 0.6 MPa.

   Cell voltage: For voltage deviation, it is required to not exceed 10% of the rated voltage.

   Use environment: In the use environment, there should be no corrosive substances and gases to avoid corrosion.

   3. Some important points of attention of the air cooler

   For the important point of attention on the chiller, in the view of Wuxi chiller manufacturer Hulin, the specific is:

   (1) Before using the air cooler, check whether the inlet pipe and the drain pipe are connected correctly and well, and whether there are any problems such as leakage and leakage.

   (2) For some machine parts, when the chiller is working, it cannot be disassembled. If disassembly or overhaul is required, the equipment must be powered off and then carried out to avoid danger. If the environment is harsh, you can increase the filter to improve the use.