When installing any equipment, a good installation environment must be ensured. Wet curtain air coolers are no exception. Only when installed properly can the effect of the air cooler be maximized. The following describes the external environment of the equipment installation team. Claim.

Where is the wet curtain cooler suitable for installation? Installation environment of wet curtain cooler

1. When there is a workplace in the room, there is no way to place the wet curtain on the indoor wall. You can install an appropriate amount on the adjacent side wall of the room, and install the cooler on the opposite wall. To ensure that the wet curtain and cooler are installed diagonally.

2. If the space distance in the workshop is relatively long, the air extraction distance of the air cooler at this time is far from the expected design effect. In order to reduce the air supply loss caused by the distance, the method of lateral ventilation can be used to deal with it. The cooling fan and wet curtain are installed in groups.

3. Generally choose to install the wet curtain at the position of the upper air inlet, install the air cooler at the lower air outlet, each wet curtain air cooler should be equipped with 8-10 square meters of water curtain, and ensure that the water curtain is evenly distributed.