1. If there is any small failure of the air cooler pump, remember not to let it work. If the filler of the pump shaft is completely worn, it should be added in time. If the pump continues to be used, air will leak. The direct impact of this is that the motor energy consumption will increase and damage the impeller.

2, if the pump in the process of using strong vibration must stop to check what is the reason, otherwise it will also cause damage to the pump.

3. When the bottom valve of the air cooler pump leaks, some people will fill the inlet pipe of the pump with dry soil and flush it to the bottom of the valve. This approach is really not desirable. Because when the dry soil is put into the intake pipe when the pump starts to work the dry soil will enter the pump, then it will damage the pump impeller and bearing, which shortens the pump life. When the bottom valve is leaking, it must be repaired. If it is very serious, it needs to be replaced.

4, after the use of the pump must pay attention to maintenance, such as when the pump is finished to put the water in the pump clean, it is best to remove the water pipe and then rinse with water.

What should be paid attention to when the air cooler pump is used?

5. The tape on the air cooler pump should also be removed, and then washed with water and dried in the light place. Do not put the tape in a dark and wet place. The tape of the pump must not be stained with oil, not to mention coating some sticky things on the tape.

6, to carefully check whether there are cracks on the impeller, whether the impeller is fixed on the bearing is loose, if there are cracks and loose phenomenon to timely maintenance, if there is dirt on the pump impeller also to clean up.

7. The interface of the air cooler pump and the pipeline must be well sealed, because if there is debris entering it, it will cause damage to the inside of the pump.

8. For the bearing on the pump, it is also the focus of inspection. After use, check whether the bearing has wear and tear.