Nowadays, there are more and more applications for air coolers, especially in factories and some rooms with poor ventilation, and for the application of air coolers, some failures will inevitably occur. At this time, it is necessary to deal with them in time. What should I do if something goes wrong?

Cooler bearing vibration exceeds the standard. The fan bearing vibration is the most common failure during the operation of the fan. The vibration of the fan will cause failures such as blade damage, loose screws, damage to the casing and air duct, etc., seriously endangering the safe operation of the fan. Ningbo City Air Cooler, Ningbo Air Cooler

How to solve the failure of the cooling fan?

In addition, it is easy for dust to fall and accumulate on the wind leaves. When the dust accumulation reaches a certain weight, the centrifugal force will be generated during the operation of the impeller. Since the dust accumulation on each blade cannot be completely uniform, the accumulation may make the blade mass distribution uneven, resulting in increased fan vibration and even problems. . In this case, only the dust accumulation on the blades needs to be produced, and the impeller will be balanced again, thereby reducing the vibration of the fan.

The application of the air cooler has the advantages of less investment and low energy consumption. At the same cooling rate, the one-time investment is about one sixth of the air conditioner, and the operating cost is about one tenth of the air conditioner. In addition, its cooling effect is outstanding and it is favored. .