Water - cooled fan through two can swing air ducts blowing has been humidified, cooling cold air. The product is suitable for humidification and cooling in various places, such as textile, machinery, chemical industry, injection molding and other high temperature workshop. Economically applicable, the higher the temperature and drying, the more significant the cooling range. The product is clean and humidifying, green, energy saving, anti-static, environmental protection and other characteristics, economical and applicable. Environmental protection, humidification, cooling, electricity saving, anti-static; Double tube can rotate freely in 75° range; Manual positioning is also available. Yichang water cooling fan to energy saving and environmental protection, cooling ventilation effect is good, early investment province and other advantages have been widely used in domestic and foreign markets, from more than a decade ago of FRP machine to the current market a large number of plastic machine, the product is constantly updated, the application field is increasingly wide. But most of the brands have high failure rate, frequent manual maintenance, high maintenance cost, short service life and other defects have not been improved, coupled with the continuous emergence of low-grade inferior assembly of water cooling fans in recent years, many users are suffering from it.

The six main reasons for the high failure rate, frequent manual maintenance and short service life of the water-cooled fan are as follows:

1. Dust filter screen or wet curtain evaporation hole can not be regularly provided with manual cleaning;

2. The continuous accumulation of dirt in the bottom basin of the machine cannot provide regular manual cleaning;

3. The electronic control system is low in science and technology, and can not automatically clean dirt, and can not identify the degree of dust blocking, which leads to various failures;

4. Poor quality of motor and special electrical accessories;

5. The material of injection fuselage, air duct and air blade is poor, and the structural design is unreasonable, which leads to small air volume, low wind, large noise and short service life;

7. The material of installation iron frame, air supply pipe, special tuyere and special air nozzle is poor, and the service life is short.