Evaporative cooling fan is an evaporative cooling and ventilating unit that integrates cooling, ventilation, dustproof and deodorization. Evaporative cooling fans can bring fresh air to the company's workshops, public places, and commercial and entertainment venues.

    However, when we choose the chiller, we must pay attention to some details. Wujiang Weisheng water board is formed by high-strength engineering plastics. The water distribution method is also a natural flow phenomenon that uses water to flow low. The plate is slanted and has a total of 30 grooves on the top. The clean water conveyed by the conveying system passes through the distributor, and the water flows uniformly along the groove to the evaporating wet curtain to ensure that the evaporating wet curtain fan is completely wet.

    When we are using the chiller, we must pay attention to some details. For the water distribution system, we need to strictly control it, instead of creating one. If the chiller system uses a tubular water spray structure, it will easily occur after a period of use. The scale is clogged, which causes some unevenness in the water distribution system. Another point is that the quality of the water is also very high. If the water quality is not ideal, it is more likely to cause water blockage, which seriously affects the cooling effect. I recommend consumers here. Use Weisheng air cooler.

Evaporative cooling fan maintenance

    How to make the evaporative chiller achieve maximum efficiency? How to operate more efficiently, safely and economically? The maintenance of this evaporative chiller is an important task. Today Weisheng is talking about evaporative type. Some maintenance knowledge of the air cooler, interested friends can come in and find out.

    1. After the evaporative system is operated for a period of time, the filter will accumulate dust and increase the air resistance. The air conditioner indoor unit leaks, thus causing the air volume to decrease or block, so it needs to be cleaned regularly.

    2. After long-term operation, due to the heating of wires and components, the joints may be loosened and the second-hand air conditioner may be detached, resulting in poor contact and lack of phase, which needs to be regularly inspected and processed.

    3. Accidents caused by failure of protection devices such as water flow switches, high and low voltage switches, safety valves, etc., should be replaced in time if found.

Note: When the evaporative cooling fan is being repaired, be sure to turn off the power. It is better to turn off the power for a while, because static electricity will be generated for a long time, and the static electricity will not disappear immediately after the power is cut off. Overhaul.