I believe that everyone is familiar with chillers, and there are many types of chillers, such as household, industrial, and animal husbandry. The evaporative cooling fan increases the air freshness of the room by transporting the space through the cool fresh air, then discharging the air of relatively poor quality in the space, and then reaching the falling space temperature. Let me introduce the design points of the air duct supply system of the air cooler.

Put the air supply port in the local area where the actual temperature needs to be cooled. The local planned air volume of the air outlet is the local air volume of the temperature at which it drops. It is based on the air volume and the speed of the air outlet to determine the air outlet standard. It is usually made of aluminum alloy. Other products such as finished products or wood can be selected according to the actual situation. The type of the product can be used in many ways according to the actual situation, but the best is to use a DC type four-sided air blower single layer or double louver; The tuyere conditioning valve adjusts the air volume.

The standard for the air supply duct is usually planned by the method of assuming the flow rate. The planned time is to save money and make the noise and wind resistance smaller, so that the air volume may be larger. Do not bend the duct elbow too much, so you can reduce the resistance. You can use it without the air duct. If you want to use it, you should use it short. The pipeline should be straight. Do not have too many turns and branches. It is possible to reduce some local resistance losses in the system pipeline. The air supply duct and the air conditioner should be connected by soft receiver, and the air supply duct outside the room should be able to keep warm, and it does not matter inside.

If there is a duct at the time of planning, a valve or a wind baffle should be placed on the branch pipe to adjust the air volume so that its air volume and request meet the planned parameters.