Among the environmental protection products, the industrial air cooler can be regarded as one, and its use is similar to that of ordinary air coolers, which are used to achieve the purpose of ventilation and cooling. Then, through different aspects, we have a preliminary familiarity and understanding of the industrial air cooler, in order to distinguish it from the ordinary air cooler. Ningbo air cooler, Ningbo cold air

    Why is the industrial air cooler an environmentally friendly product? This is because such a chiller does not have a compressor and a refrigerant, and does not cause environmental pollution. Therefore, this chiller is classified into the environmental protection category. In principle, the method of convection ventilation is used to ventilate and cool the room to achieve the desired temperature and humidity.

1. The main characteristics of industrial air coolers

    (1) It can be green and environmentally friendly, and it hardly pollutes the ambient air. In addition, the cooling effect is very obvious. For different regions, there can be a suitable cooling range to stabilize the temperature.

    (2) From the perspective of its operating costs and investment benefits, industrial coolers are also very good, with better investment recovery and lower operating costs.

    (3) Compared with the traditional air-conditioning system, the cost can be effectively reduced, and some can be reduced to less than half.

    (4) The industrial chiller is simple and convenient to operate, requires little maintenance and is easy to carry out. No professional maintenance and repair personnel are needed, and some simple problems can be handled.

    (5) During the operation of the industrial air cooler, the noise and vibration are small, and the body itself will not dissipate heat to the surroundings, which can avoid overheating.

2.Instructions for the installation of industrial air coolers

    Generally speaking, it is better to install industrial air coolers outdoors. If the ambient air quality is good, it will be of great benefit to it. However, it cannot use the return air method because problems may occur. For the air ducts, it should be avoided to be too long, it is better to control it to 15-20 meters. The use of elbows should be minimized or even not used.

    Through the above two parts, we can clearly know what the characteristics of the industrial air cooler and some must-know contents on the installation, so that it can be used in actual operation to improve its performance and effect. From another perspective, these are also necessary prerequisites and preparations for in-depth discussion.

 Ningbo Stock Recovery Terminal Machine Vibration Plate