How to make the air cooler play a considerable efficiency? How to be more assured, safe and economical operation? The maintenance of this air cooler is an essential task.

1. After the air cooler system is running for a period of time, dust will accumulate on the filter screen, increasing air resistance, and the air conditioner indoor unit will leak water, which will cause the air volume to decrease or become blocked, so regular cleaning is required.

2. After long-term operation, due to the heating of wires and components, the connectors will loosen and fall off, which will cause poor contact and phase loss. Periodic inspection and treatment are required.

3. Accidents caused by failure of protection devices such as water flow switches, high and low pressure switches, safety valves, etc., should be replaced in time if found.

 

 Precautions 

1. When repairing the air cooler, be sure to turn off the power. It is quite good to cut off the power and wait for a period of time, because static electricity will be generated for a long time, and the static electricity will not disappear immediately after power off.

2. If it takes a long time to transport, we should take some protective measures to prevent the product from being destroyed when it reaches the customer.

3. For this we should protect the outside of the cooler package, and put it upright when placing it, so as not to be stressed or bumped.

4. When carrying the porter, it should be handled gently to avoid product damage. Before the product is installed and operated, we should check its machine.

  

5. Add more lubricant to the bearing.

6. We should pay attention to the voltage of the cooler to the dust on the cabin, such as the blades and shutters on the fuselage. The power supply of the air cooler must meet the above specifications when the air cooler is used, and a deviation of the voltage can exceed 10 of the rated voltage.

7. When the air cooler stops working, we cannot use external force to open the shutters. This is to prevent a closeness of the blinds.

8. In short, the air cooler is generally unpacked, and it needs to be well packed under special transportation environment to prevent the product from being damaged during transportation.