The function of the wet curtain air cooler is similar to that of the air conditioner, which can reduce the temperature of a certain space, and has a certain ventilation capacity indoors. It is an environmentally friendly and economical household appliance in the summer. The air cooler manufacturer here introduces the maintenance method of the wet curtain air cooler and the treatment method after the failure.

Maintenance method

1. Keep away from hard, heavy, corrosive and dirty items when storing the wet curtain air cooler. For example, some hard objects such as brooms, shovel, plastic egg trays should be placed away from the wet curtains. At the same time, when spraying corrosive substances such as disinfectant or white lime in the field, avoid contact with the wet curtain paper to prevent damage.

2. A white protective net can be installed at the front of the wet curtain air cooler. In summer, there are many windy sands, and it is easy to block the wet curtains due to factors such as chicken feathers in the scaled chicken farm area. Therefore, a white protective net can be installed at the front of the wet curtain to block foreign matter from entering the wet curtain.

3. The filter and wet curtain of the wet curtain air cooler should be washed once every half month. After the wet curtain is clogged, the effective air inlet area will be greatly reduced, which will affect the wind speed inside the house and the cooling effect of the wet curtain. Therefore, the filter and the wet curtain should be cleaned once every half month. When cleaning the wet curtain, first wash the sediment with a thick water pipe, then add the wet curtain cleaning agent such as Ouke in the pool, start the wet curtain to clean the surface of the biofilm, and then replace the clean water source.

4. The wet curtain water should be replaced in time according to the specific conditions. After the wet curtain is used for a period of time, the water quality begins to turbid and the number of microorganisms increases sharply. At this time, the water source should be replaced in time to avoid affecting the cooling effect and avoid harm to the flock.

5. If it is found that the wet curtain water supply is insufficient or uneven, check whether there is water shortage in the pool, whether the water pump is running, whether the water supply pipeline and the water pump inlet, especially the small holes on the water spray pipe, are blocked, and check the water spray pipe. Whether the road is in the middle of the wet curtain. The normal spray height should be greater than 80mm.

6. After the summer, maintenance work should be done. The water in the water pipe and the pool should be released and cleaned, and then the pool should be tightly sealed to prevent dust and debris from entering the pool; the pump motor should be preserved to prevent freezing. When the curtain paper is not in use, apply the shade item to prevent oxidation and affect the service life.

Treatment method for wet curtain and water curtain blockage

When the water curtain is severely blocked, stop the water curtain wet curtain, use a high-pressure vacuum cleaner to absorb the dust and debris in the surface and the hole, and use the air pump to spray outward on the inside of the water curtain to enhance the cleaning effect. After the suction is completed, it is repeatedly cleaned with water through the water curtain circulation system, thoroughly disinfected, air-dried and ready for use, and the water curtain is as new as possible.