Among environmentally friendly products, industrial air coolers are considered to be one. In terms of usage, they are similar to ordinary air coolers, and they are used to achieve ventilation and cooling purposes. Then, through different aspects, we have a preliminary familiarity and understanding of industrial air coolers in order to distinguish them from ordinary air coolers.

  Why are industrial air coolers an environmentally friendly product? This is because this type of air cooler has no compressor and refrigerant, and will not pollute the environment, so this type of air cooler is classified into the environmental protection category. In principle, it is through convection ventilation to carry out indoor ventilation and cooling, so as to achieve the desired temperature and humidity.

  1. Main features of industrial air coolers

  (1) It can be environmentally friendly and hardly pollute the ambient air. In addition, the cooling effect is very obvious, and for different regions, there can be a suitable cooling range to stabilize the temperature.

  (2) From the point of view of its operating costs and investment benefits, industrial air coolers are also very good, with better return on investment and lower operating costs.

  (3) Compared with traditional air conditioning systems, the cost can be effectively reduced, and some can be reduced to less than half.

  (4) The operation of industrial air cooler is simple and convenient, the maintenance workload is small and easy to carry out. There is no need for professional maintenance personnel, and it is able to deal with some simple problems.

  (5) During the operation of the industrial air cooler, the noise and vibration are small, and the body itself will not dissipate heat to the surroundings, which can avoid overheating.

  2. Installation instructions for industrial air coolers

  Generally speaking, it is better to install industrial air coolers outdoors. If the surrounding air quality is good, this is of great benefit to it. However, it cannot use the return air method because there may be problems. For the air duct, it should be avoided to be too long, and it is better to control it at 15 to 20 meters. The use of elbows should be minimized or even not used.

  Through the above two parts, we can clearly know what are the characteristics of industrial air coolers, and some must-knows on installation, so that they can be used in actual operations to improve their performance and effects. From another perspective, these are also necessary prerequisites and preparations for in-depth discussion.