Large and medium-sized industrial air cooler application [tips] Large and medium-sized industrial air cooler manufacturers explain! Large and medium-sized industrial air coolers are generally used in factories and other locations, especially in summer. Standing on the roadside should also be able to feel the energy of large and medium-sized industrial air coolers. Although the application of large and medium-sized industrial air cooler is very helpful, there are still some problems that need to be paid attention to in the use of large and medium-sized industrial air cooler. Actually can master from six, follow the large and medium-sized industrial air cooler manufacturers to understand. Because of the complex application scenarios (most commonly seen in industrial plants), large and medium-sized industrial air coolers should be maintained to avoid some emergencies destroying the quality of centrifugal fans and harming the operation of large and medium-sized industrial air coolers. There are many small maintenance points for large and medium-sized industrial air coolers, which are summarized as follows:

1, each large and medium-sized industrial air cooler for 70-100 square meters of room temperature reduction. Beyond these values, the actual effect of large and medium-sized industrial air coolers is likely to be less than ideal, which is easy to cause too much work and problems of large and medium-sized industrial air coolers.

2. When large and medium-sized industrial air coolers are used, check whether there is paper debris, dust and other dirt in the wet curtain and the reservoir. Clean it 1-2 times a year.

3. Large and medium-sized industrial air cooler is the cardiovascular of cold fan. If there are common faults, the switching power supply of large and medium-sized industrial air coolers should be cut off immediately and welders should be arranged for immediate maintenance. Attention should be paid to wire joints when installing large and medium-sized industrial air coolers, and care should be taken when disassembling and installing centrifugal impellers of large and medium-sized industrial air coolers to prevent leaf deformation of large and medium-sized industrial air coolers from striking with the shell.

4. If the float switch of large and medium-sized industrial air cooler is ineffective, and it is found that there is less water or overflow water in the pool of large and medium-sized industrial air cooler, it should be corrected and replaced in time.

5, once found that large and medium-sized industrial wet curtain cooling fan power supply is not enough or not divide evenly, inspection of large and medium-sized industrial air cooler storage tank is less water, large and medium-sized industrial cooling fan pump operation, large and medium-sized industrial cooling fan flow pipe and pump channel is blocked, large and medium-sized industrial cooling fan spray nozzle head is located in the middle of the damp curtain. The relative height of normal sprinkling of large and medium-sized industrial air cooler can not be ignored. If the water level is too low, it is very easy to burn large and medium-sized industrial air cooler.

6, large and medium-sized industrial air cooler maintenance, power off, cut off large and medium-sized industrial air cooler switch power supply after a period of time, because the long-term use of large and medium-sized industrial air cooler will release static electricity, electrostatic induction is not easy to fade after power failure, so safety after maintenance. This is also the application of large and medium-sized industrial air cooler should pay attention to the six aspects. Friendship reminds us to be more careful in the use of large and medium-sized industrial air coolers, otherwise it will cause certain harm to their production activities, and may also affect the use period of large and medium-sized industrial air coolers. So that's what we have to watch out for.