One of the important website products and main keywords of the air cooler should be taken seriously in its learning attitude, and in terms of learning requirements, it must be comprehensive, so that it can be used correctly and reasonably. Cooler, and at the same time, to get good results. Therefore, based on this, next, we will carry out the knowledge explanation work in this area, so that everyone can master and apply it in time.

1. If the air cooler in the cold storage is frosted, is it necessary to carry out defrosting work?

     If the air cooler in the cold storage has frosting phenomenon, then it is necessary to carry out defrosting work, otherwise, the air cooler cannot work normally. In addition, the defrosting method can be either manual defrosting or mechanical defrosting. As to which one is selected, it depends on the actual situation and is determined by it.

2. In terms of air coolers, how can they be classified?

     In general, air coolers can be divided into two types: household air coolers and industrial air coolers. If it is a household cooler, it is mainly used to reduce the indoor temperature in summer, and industrial coolers, which are generally used in refrigeration equipment, are an important part of refrigeration equipment. For example, they can be used as cold storage internal machines .

3. How to deal with the overcurrent protection of the cooling fan?

     The overcurrent protection of the air cooler is a protection mechanism of the air cooler, indicating that the current in the machine equipment exceeds the specified limit, and the equipment has a fault problem. At this time, the operation of the air cooler should be stopped immediately and carried out Check the work in order to find the problem and solve it in time, so as to avoid the adverse effects or consequences.

     The above-mentioned questions are all about the air cooler, and at the same time, they are also related to the website products. Therefore, I hope that everyone will take it seriously and carry it out in order to master it in time, so that it can be well used in actual work and at the same time, to improve the use of the product, so that you can benefit from it.