The selection of industrial water - cooled air conditioning (industrial air cooler) is very important in all designs. What problems should the designer of Yuchen fresh air system pay attention to? Here is a small edition to give you a detailed explanation:

1. To select the model from the distance between the exhaust air, we first need to understand our own brand. For each type and specification, the exhaust air volume, air pressure, and power consumption and other major parameters need to be understood. Conclusion After installation, the desired effect and temperature reduction effect can not be achieved.

2. Choose the model from the surrounding environment of the wall. As we all know, the air outlet of industrial water-cooled air conditioning is divided into three kinds: upper air outlet, side air outlet and lower air outlet. If the investigation is not careful, sometimes the wall is not enough to install the bottom of the air, but sometimes my business staff, because of the site is not careful, lack of experience and other factors, can not correct the direction of the air outlet, resulting in the construction of the entrance project also need to temporarily disassemble and replace the model, to the customer and company confusion, unnecessary trouble.

3, from the wall bearing capacity to select the model, the first must be clear to install the main part of the wall is a solid wall, or other single wall or steel frame structure, can bear the weight of their customized model, if not related to the actual site situation, it is just to abandon the essentials, and has no essential practical significance, customers will not accept our own plans, It can even be said that after installation, it will lead to more damage to customers, because some industrial water-cooled air conditioners are centrifugal dehydrators, which are particularly heavy. If they fall down after installation, the result will be unsssible design scheme and also a safety risk.

4. Model selection is based on the use experience of the installation site. Here I will take a case as an example. In order to pursue rights and interests and perfect the sales volume of industrial water-cooled air conditioners, some companies blindly expect customers to install more sets of industrial water-cooled air conditioners. Even higher, this kind of not only enhances the installation cost for the customer, but also adds very great pressure to the middle and late use cost, which is a kind of consumption.