News Detail

——

Environmental protection air conditioning application and cleaning methods

Add pool saliva should be clean water, in order to maintain environmental protection air conditioning pipe patency and cooling water curtain efficiency. If have found that the cooling water supply is not enough or uneven, should check is less water in the pool, pool float switch can automatically filling water and water), the centrifugal pump is running and its water supply pipe road and parts of the centrifugal water pump into the water, especially water spray head on the road of small round hole with and without obstruction, check the spray pipe jobs is located in the middle of the damp curtain.) The environmental protection air conditioning control circuit for cooling water curtain should be installed in the room. When in use, it should ensure that there is no dirt in the cooling water curtain and the reservoir. It should be cleaned 1 to 2 times a year.

Cleaning method
When cleaning environmental protection air conditioning, it is necessary to break off the switching power supply and fold the empty plate making process to prevent some people from cheating the power switch, leading to risks. Twist THE SCREW IN THE FILTER OF ENVIRONMENTAL PROTECTION AIR CONDITIONING, THE FILTER IS mentioned UPWARDS, and then the OVERworry shading background part is pulled outward, you can take out the filter, the demolition royal OF natural WET shade is also such.
Carefully remove the environmental protection air conditioning four filters, with clear water soak then rinse clean. Remember NOT TO PUT a LITTLE bit of chemicals, in case of erosion wet curtain and screen, the pressure is not too high, in case of damage to screen and screen.
Use plastic bags to cover the environmental protection air conditioning, connect the drinking water spray pipe and cleaning port, rinse the spray pipe in the opposite direction with clean water. Clean the basin body with clean water environmental protection air conditioning.
The four filters or wet curtain again installed on the environmental protection air conditioning above. Then reconnect the main power supply of the environmental protection air conditioner, and then perform other operations ten minutes later.
Environmental protection air conditioning, industrial air cooler is the use of water circulation cooling air environment temperature. There is a lot of smoke in the air. Work intensity is large, often clean the air conditioner outside the filter.
1. Disconnect the main power supply of the air conditioner (remove the controller, in case some people start fraudulently, leading to risks).
2, twist open the screw in the filter, mention the filter up, and then pull the background part of the worry shading outward, you can take out the filter (wet curtain removal royal also similar).
3, take care to remove eight filter (or wet curtain), with clear water soak and rinse clean (can not put all chemicals, in case of corrosion wet curtain and filter, the pressure is not too high
To prevent damage to the screen and curtain).
4. Cover the centrifugal fan with plastic bag, connect the drinking water spray pipe and cleaning mouth, and rinse the spray pipe in the opposite direction with clean water.
5. Flush the host basin with clean water.
6. Install the eight filters (or wet curtains) back on the server.