The high temperature is hot, the air is not circulated, and the uncomfortable environment of dust in the workshop will lead to the increase of staff turnover rate. The reduction of production force and quality control will probably lead to customers not choosing you. How to reduce the temperature of the relevant plant is recommended below? And what are the common plant cooling?

How to reduce the temperature of the plant?

1. Improve ventilation and cooling:

The specific method is to open the original ventilation Windows in the workshop, so that the outside of the workshop is introduced according to the Windows, and the high temperature in the workshop is brought in the step of air activity, so as to reduce the high temperature fusion in the workshop. This method is small for the category. More Windows. Better ventilation standards of the workshop effect is obvious. For an area of more than 300 square meters. Ventilation standard deviation workshop, poor function, characteristics are worth.

2. Machine and equipment negative pressure fan super strong exhaust high temperature air:

Specific methods to close to the source of high temperature wall or roof machine equipment negative pressure fan. When the negative pressure fan is energized, the negative pressure caused by the high air volume of the negative pressure fan is used to exhaust the air, and the high temperature air in the workshop is quickly discharged out of the workshop along the air flow, and the fresh clean air from the outside is introduced into the workshop together. This method is available at scale. Building with standard deviation of ventilation. Its benefits can solve the plant temperature reduction faster.. Conducive to implementation.

More common plant temperature reduction machinery and equipment have the following two kinds:

1. Negative pressure fan, exhaust system high temperature hot air cooling. The negative pressure fan of the wall and window machine equipment in the workshop forces many combined high temperature hot air in the workshop to be discharged out of the workshop, forming a negative pressure development trend of the workshop, forcing the air outside the workshop to flow into the workshop for convection heat transfer and ventilation, reducing the composition of high temperature hot air in the workshop, and developing the circulation speed of air commodity in the workshop. This method can be used to block the flow of air goods. All plants have high temperature incandescence treatment plant.

2. Mobile air conditioning, cooling the air outside the building and then sent to the building for cooling. Machine equipment mobile air conditioning on the wall of the workshop, according to the fan exhaust system to the workshop. After the outdoor fresh air passes through the infusing cooling water curtain, the air and water are in sufficient contact to digest the heat and temperature of the important links of the air, so as to achieve cooling. Ventilation. Dust removal. Plus workshop air oxygen content intention. This scheme is especially used in areas where high temperatures are available.