In the cold storage, transport machinery and equipment production and manufacturing automation production lines and other places, air cooler is the summer refrigeration celebrity. The serial communication interface between flame retardant fiber air duct and air cooler is described in detail in the original text, which is actually the installation step of air duct.

There are five steps:

1. Initially create the position of the hanging parts according to the construction drawings, and then use the electric hand drill to hook expansion screws or assemble fixed supports in the wall boxes at the end and end of the flame retardant fiber cloth air duct.

2. Connect the steel wire rope with the hook expansion screw of the wall with the spring lock, and straighten the galvanized steel wire. If the length of the galvanized steel wire is higher than 15m, it can help to straighten the galvanized steel wire with the tightener.

3, along the suspension training galvanized steel wire length direction, in the galvanized steel wire every 1.5~2m above the assembly of a vertical hanging wire, to lift the horizontal galvanized steel wire, to prevent the horizontal galvanized steel wire due to the total weight of the flame retardant fiber duct itself and slack. Ensure that the galvanized steel wire is horizontal after the suspension system flame retardant fiber cloth duct.

4. Create the corresponding flame retardant fiber cloth air duct of each air cooler according to the design drawing, and then connect the front section of the corresponding flame retardant fiber cloth air duct with the air vent of each air cooler with a binding belt. Hang the system on galvanized steel wire in turn according to the symbolic number of each section of flame retardant fiber cloth air duct, and pull up the middle of each section of the pull lock. Note that the hook in the flame retardant fiber cloth duct does not need to contradict the vertical pole.

5. After the installation of the flame retardant fiber cloth drain pipe, open the relevant air cooler, run the flame retardant fiber cloth air duct, and check whether the binding belt of the safety outlet of the flame retardant fiber cloth air duct is firm; Whether the hooks in each section of flame retardant fiber cloth air duct are hung to; The pull is not exhaustive; Whether the cover of the lock block the lock; Whether the hook is inconsistent with the ball screw; Whether the surface of the flame retardant fiber cloth air duct is clean and tidy.