When the air cooler is in normal operation, it is generally used with drinking water. For a long time, it is easy to appear that there are many dirt in drinking water, water residue and machine damage in the key parts of the wet curtain and the water in the chamber. In order to ensure the actual effect of ventilation and cooling of the air cooler, the following aspects about the correct maintenance of the industrial water cooler can be referred to by everyone.

1. When the air cooler stops using, clean the frost layer and ice block in the finned tube radiator with clean cold water, discharge the water storage in the influent tray, and then change the axial flow fan to dry the water;

2. When cleaning the cold air machine, first pull out the power cord plug, twist the screw, take out the back cover, and then wipe the filter screen and wet curtain with a wet cloth. Pay attention to the other components do not wet when wiping, so as to prevent corrosion of the components;

3. The fan of the air cooler should be placed horizontally, and the area placed should be far away from the source of fire or combustible materials to prevent the machine from being burned down without cause;

4. When the air cooler is used, check whether there is dust and other obstacles in the inlet vent. If there is any obstacle, wipe it with a dry rag again and then use it again.

5. The cold air machine should be cleaned regularly to avoid the blockage of the antifouling filter net or volatile hole. If the air cooler is used for a long time, it will also lead to the continuous deposition of the machine basin dirt, resulting in common machine failures, which will seriously affect the application and reduce its service life