The weather is hot, summer cooling, you are how to solve the industrial plant cooling difficulties? As the saying goes, do not fight uncertain combat, no matter what equipment you use to carry out cooling, need early detection and maintenance! Only then can the confusion be dealt with immediately when needed. If you have not applied the air cooler to carry out cooling, then I highly recommend you to know about the air cooler, if you have already used the air cooler to carry out industrial plant cooling.

Below, let's learn about the 3 levels that the air cooler must be maintained in advance:

1. Cold fan odor removal: it takes a long time to use. If we do not clean and maintain the cold fan on time, it may cause the odor of the centrifugal fan. If the operation is still heavy odor after cleaning, you can add disinfectant to the stainless steel water tank of the air cooler, so that the disinfectant is sufficient to soak the filter device and each corner of the internal structure of the air cooler, and constantly apply disinfection and sterilization cleaning several times to remove odor.

2. Water curtain cleaning: water curtain disassembly, cleaning with high pressure water, generally can be cleaned. If the water curtain can not be cleaned, with high pressure water to clean the water curtain and the bottom of the gas storage disk, then the cleaning liquid spray on the water curtain, the water curtain thoroughly wet soak 10min, and then clean with high pressure water, until the residue in the water curtain fall down. This can make the cooling effect of the air cooler better.

3. Maintenance before summer operation: if the air cooler is not used for a long time in winter, simple maintenance should be carried out before the first operation in summer. Remove the side plate of the air cooler, open the water resource, check the water seepage condition of the pump pressure switch, set the deep layer of the water storage tank, and assemble the side plate. After 5 minutes of operation, check whether the filter flow is symmetrical and saturated.

4. Daily maintenance: the operation of the air cooler is very environmental protection and energy saving, easy maintenance, and no technical professional maintenance staff. Because the cooling tower is generally assembled outdoors, it can be cleaned once or twice a month to ensure the actual cooling effect and air index faster.

① Internal structure cleaning:

If the air cooler runs for a long time, in order to ensure the refrigeration effect, the equipment should be cleaned on time. The equipment cleaning cycle time is once every two months: remove the side plate of the air inlet; Then clean the car chassis: clean with a thin cloth or a soft brush; If be very dirty, clean with neutral clean agent warm solution, subsequently tap water cleans drop in temperature water shade, install side board from new.

② Air cooler appearance cleaning:

Maintain the air cooler view of cleaning, you can use a soft cloth to scrub the surface of the central air conditioner, if the dirt can not be removed, can be directly cleaned with household neutral detergent, do not use volatile organic solvents or hard brush immediately clean, in order to prevent damage to the appearance of the air cooler, resulting in irreversible damage.