Energy saving and environmental protection industrial air cooler is generally used in factories and other locations, especially in summer. You should be able to feel their energy from the side of the road. Although it is very helpful to use, there are still some aspects to pay attention to in use. Actually can master from the six points, follow the energy-saving and environmental protection industrial air cooler manufacturers to understand.

Because of the complex application scenarios (most of which are industrial plants), energy saving and environmental protection industrial air cooler should be maintained to avoid some emergencies that damage the quality of the centrifugal fan and harm the operation. The summary is as follows:

1, each wet curtain machine is suitable for 70-100 square meters of room temperature reduction. Beyond these values, the actual effect is likely to be not ideal, easy to cause excessive equipment work and problems.

2. When energy saving and environmental protection industrial air cooler is used, check whether there is shredded paper, dust and other dirt in the wet curtain and reservoir. Clean it 1-2 times every year, the water in the reservoir should be drinking water or other clean water.

3, fan is the heart of industrial air conditioning. If there is a common fault, should immediately cut off the switching power supply, and arrange welders to repair immediately. Pay attention to wire joints when assembling, and be careful when disassembling and assembling centrifugal impeller to prevent impeller deformation and shell impact.

4. If the operation of the float switch of the energy-saving and environmental protection industrial air cooler is invalid, and there is less water or overflow water seepage in the pool, it should be corrected and replaced in time.

5, once the wet curtain power supply is not enough or uneven, check whether the water storage tank is less, the pump is not operating, the water supply pipe and pump channel is not blocked, the nozzle head is located in the middle of the wet curtain. The relative height of normal sprinkling should not be ignored. If the water level is too low, it is very easy to burn the equipment.

6, energy saving and environmental protection industrial air cooler maintenance, power off, cut off the switching power supply after a period of time, because of long-term use will release static electricity, static induction is not easy to fade after power failure, so safety after maintenance.

This is also the application of energy saving and environmental protection industrial air cooler should pay attention to six aspects. Friendship reminds us that we must be more careful in use, otherwise it will cause certain harm to our production activities, and may also affect the service life of energy saving and environmental protection industrial air cooler. These are the things we need to be aware of.